Introduction; Resetting The Smartnode Device When It Is Operating And The Power Led Is Lit; Reset Button; Reset Button Periods (In Seconds) For Performing Actions - Patton SmartNode SN4170 User Manual

SmartNode 4170 User Manual

Introduction

The Reset button (see figure
• Reboot the SmartNode device (see section
Power LED is lit")
• Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section
is lit")
• Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
"Resetting the SmartNode device when it is operating and the Power LED is
• Troubleshoot the SmartNode device if it is not booting properly (see section
when it is initially powered off "
Resetting the SmartNode device when it is operating and the Power LED
is lit
The Reset button has the following behaviors depending on how many seconds (see
pressed (see table 10 on page 56 for the results from pressing the button).
Figure 19. Reset button periods (in seconds) for performing actions
Period
A
(less than 1 second)
B
(1 to 4 seconds)
Introduction
18) is used to do the following:
"Resetting the SmartNode device when it is operating and the
"Resetting the SmartNode device when it is operating and the Power LED
on page 57)
Figure 18. Reset button
Table 10. Results from pressing the Reset button
Reboot device
No action
F • Reset Button Functions
lit")
"Resetting the SmartNode device
figure
Action
19) the button is
56