Valcom V-WMCA Series Installation Manual page 56

Web Interface - IP Status
3
8
NOTE: Everything in this tab reflects settings entered earlier or hard-wired into the master clock. This page
is view-only. None of these settings can be changed from this tab.
1. MAC Address - Displays the MAC address for the master clock.
2. IP Address - Displays the IP address for the master clock. This can be changed through the IP
Settings tab.
3. Board Serial Number - Displays the serial number for the circuit board inside the master clock
4. Unit Build Date - Displays the assembly date of the master clock.
5. Code Build Date - Displays the finalization date for the master clock software.
6. SVN Revision - Displays the software version number. This is NOT the same as the Code Build Date.
7. Device Name - Displays whichever name the technician has given to the master clock. This can be
changed through the IP Settings tab.
8. Paid Provisioned Features - Displays each feature that has been purchased with the master clock.
1
2
4
5
6
7
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
56