Valcom V-WMCA Series Installation Manual page 50

Web Interface - System Settings
2
1. User Password - This field allows the user to enter a new password for user-level programming. Users
may view every tab, but cannot change every setting. The password must be entered once in the User
Password field and once in the Confirm Password field, otherwise the password will not be changed when
the Submit button is pressed. The password must be at least four characters long, and may only
use the numbers 0-9.
2. Technician Password - This field allows the user to enter a new password for technician-level
programming. Technicians may view and change the content on every tab. The password must be entered
once in the Technician Password field and once in the Confirm Technician Password field, otherwise the
password will not be changed when the Submit button is pressed. The password must be at least four
characters long, and may only use the numbers 0-9.
3. Send RS485 Data Every - These fields allow the user to enter values for how often RS485 time data
will be sent by the master clock.
NOTE: Passwords may only consist of numbers 0 through 9. Do not use any symbols, or characters from
languages other than English.
1
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
3
P. 540-563-2000
F. 540-362-9800
www.valcom.com
50