Table of Contents
Advertisement
C.1.7 Carrying strap / barcode pen holder
To secure the carrying strap:
Placeholder:
Halterung_Verschluss-
kappen.tif
Tragegurt.tif
To secure the barcode pen holder to the carrying strap:
Placeholder:
Placeholder:
Barcode-Hal-
Gurt-
terung.tif
klemme.tif
1 Remove sealing caps from the sides of the
housing.
Fix s s ealing c c aps o o n t t he i i nside o o f t t he s s ervice c c over:
1 Place the measuring instrument on its front.
2 Pick the service cover up at the markings
(arrows) using your index finger and thumb and
press gently to release the lock.
3 Fold the service cover up and remove it.
4 Secure the sealing caps in the two holders on
the inside of the service cover ( ).
5 Attach the service cover and engage it in place.
2 Engage the carrying strap clip in the fixing eyelets
on the side of the device. Note the guide groove.
The strap must point "down" ( ).
1 Loosen the carrying strap at the buckle and
remove.
2 Lead carrying strap through the strap guide of the
barcode pen holder ( ).
3 Lead carrying strap through the buckle ( ) and tight-
en.
C. Product description
C.1 Measuring instrument
13
Advertisement
Table of Contents
