Table of Contents
Advertisement
G.2 Measurements
G.2.1 Flue gas
The
menu is the main measuring menu in which - in addition to the readings
Flue gas
measured with this function - the readings of all measurements carried out are displayed
(if selected in the
Display edit
this menu.
The
menu can always be selected, regardless of which probes are connected.
Flue gas
Calling up the function:
Measurements
- Possibly: Gas zeroing (30 s).
If n n o f f uel h h as y y et b b een s s elected:
Select the fuel
Measuring:
1 Start measuring:
Reading C C O u u ndiluted:
If a separate measurement of CO undiluted has not yet been carried out, this value is
calculated using the readings of the flue gas probe and is updated continuously.
If CO undiluted has already been measured separately, the value obtained is adopt-
ed.
- The readings are displayed.
2 Stop measuring:
Options:
To print readings:
To save readings:
- The readings from the flue gas measurement, as well as any readings taken over
into the menu
ed in a measurement protocol (automatic furnace data are not printed).
menu). All readings can also be saved or printed out from
OK
Flue gas
.
OK
.
Start
.
Stop
.
Print
.
Save
from other measurement functions are stored and/or print-
Flue Gas
.
OK
G. Measuring
G.2 Measurements
35
Advertisement
Table of Contents
