ShoreTel 4500 Installation Manual page 72

Backup and Restore
USAGE:
ewn help|list
ewn save|load|delete [file name]
ewn upload|download [file name] [ip address]
where file name must use extension .conf1 or .conf2.
At the command prompt (bash#), you can create the backup file, store it to local flash, copy
it to a remote TFTP server, copy it from a remote TFTP server, delete it, load it, or list all
available backup files.
If you want to:
Create a backup file and save it to
local flash
Copy a backup file from the VPN
Concentrator to a TFTP server
Download a backup file from a
TFTP server to the VPN Concentra-
tor
List available backup files
Delete a backup file
66
Table 3: Configuration Backup CLI Commands
bash# ewn save <filename>
Filename format (must use extension .conf1 or .conf2):
<filename1>.conf1
<filename2>.conf2
<filenameX> can be a combination of both letters and charac-
ters. For example, EWNxx_041503.conf1 or
location1_Exx00.conf2. Trying to use any other filename for-
mat will result in the error message:
"EWN_ERROR_BAD_FILE_NAME".
Note:
The .conf extensions have special significance. If you save a
configuration with <filename-new>.conf1, any existing older
<filename-old>.conf1 will be overwritten with the new one.
bash# ewn upload <filename> <tftp server IP Address>
bash# ewn download <filename> <tftp server IP Address>
bash# ewn list
This command lists all backup files stored in flash memory. If
no file has been saved, the command will only return the
bash# prompt.
bash# ewn delete <filename>
Use this command
Appendix A