Table of Contents
Advertisement
Accessing the Web Configuration GUI
1.6
Accessing the Web Configuration GUI
You can configure the VPN Concentrator using the web configuration GUI. The device is
shipped with the pre-configured IP address 192.168.1.1 for the LAN ports.
1.6.1
Connecting to the Web Configuration GUI (4500/4550)
To connect to the web configuration GUI for the 4500/4550, follow these steps:
1. If you are connecting to the 4500/4550 for the first time:
a. Connect one end of an Ethernet cable to local LAN port 4 of the 4500/4550.
Connect the other end of the cable to your computer' s Ethernet port.
b. Assign static IP address 192.168.1.2 with subnet 255.255.255.0 to the Ethernet
interface of the computer that is connected to the LAN port of the 4500/4550.
c. Launch a web browser and enter the following URL:
2. If you are connecting to the 4500/4550 after initial network configuration:
a. Connect to any available LAN port, but only if VLANs have not been enabled.
If VLANs have been enabled, connect to LAN port 1.
b. Assign a static IP address and subnet that is on the same broadcast domain as
the LAN IP address provided by your system administrator.
c. Enter the LAN IP address provided by your system administrator.
3. Press Enter. The following login window appears.
4. Enter the username as "root" and the password as "default" to log into the system. The
System configuration page displays.
12
Note:
If initial network configuration has already been completed for this
device, you will need to obtain the device' s LAN IP address from your
system administrator to connect to this device.
http://192.168.1.1
Figure 1-12 Web Configuration GUI Login Window
Chapter 1
Hide quick links:
Advertisement
Table of Contents
