ShoreTel 4500 Installation Manual page 51

Chapter 4
Parameter
Locality
Organization Name
Organization Unit
Common Name
Email
Password (Optional)
4.1.6.3 Adding a Certificate
When adding a certificate, you must select two files: the actual certificate and the
corresponding key file. The exception to this is CA certificates which may be added
without a corresponding key file. However, in that case, they cannot be used to sign other
certificates.
To add a Certificate, enter the following information in the Add a Certificate section of the
SSL/TLS Certificate Store page. When you are finished, click the Add Certificate button to
upload the signed certificate and key file. Once the signed certificate has been installed on
the system, it will be available in the Stunnel Configuration page to be applied to the
system.
Parameter
Certificate Name
Certificate Type
VPN Concentrator Installation and Configuration Guide
Enter the location. For example, the name of a city.
Enter a name for the organization (for example, the com-
pany name).
Enter a name to identify the specific organization (for
example, the name of a department).
Enter the FQDN assigned to the system.
Enter the email address to contact regarding the certifi-
cate.
This field is used for HTTPS certificates only. Optionally,
it is used to secure the key. If a password was used when
generating the key, the same password must be specified
here.
Figure 4-17 Adding a Certificate
Enter a name for the certificate. This name is only used
to manage the certificate and is shown in the certificate
list.
Select the type of certificate, HTTPS or CA Certificate.
The default is HTTPS.
Configuring the VPN Concentrator
Description
Description
45