Table of Contents
Advertisement
Chapter 1
— 2 hollow wall anchors
•
If the unit will be mounted in a rack:
— 1 Flat or Philips screw driver
— 2 rack-mount brackets
— 6 rack-mount bracket screws
1.5.2
Desktop Installation
1. Remove the unit and the accessories from the shipping container.
2. Place the unit on a flat, dry surface such as a desktop, shelf or tray.
1.5.3
Wall-Mount Installation (4500 and 4550)
You can mount the unit on a wall using the two built-in hang holes on the bottom of the
appliance. We recommend that you use two wood screws, at least 1 ½ inch long.
1. Install two screws 5.9063" (150 mm) horizontally apart on a wall or other vertical
surface. The screws should protrude from the wall so that you can fit the appliance
between the head of the screw and the wall. If you install the screws in drywall, use
hollow wall anchors to ensure that the unit does not pull away from the wall due to
prolonged strain from the cable and power connectors.
VPN Concentrator Installation and Configuration Guide
Figure 1-7 Diagram of round and flat head wood screws
Tip:
If the ports will not be accessible or visible once the device is mounted
on the wall, connect a PC to the VPN Concentrator' s Ethernet port and
access the web configuration GUI to configure the device as described in
Section 1.6
and
Section 1.7
before continuing.
Physical Installation
9
Hide quick links:
Advertisement
Table of Contents
