Table of Contents
Advertisement
Chapter 4
Parameter
Max Clients
Certificate
VPN Concentrator Installation and Configuration Guide
Description
Specify the maximum number of simultaneous client
sessions supported by Stunnel. The permissible range of
this parameter is 1-100. By default, the value is set as
100.
Note that every stunnel requires a unique PPP peer IP
Address, assigned from the Stunnel IP Pool, configurable
using the bottom half of this page. If the number of
configured IP Addresses is less than Max Clients, then
the simultaneous client sessions will be limited by the
configured IP Addresses. By default, the value of max
clients is as per license. Specify the maximum number of
simultaneous SSL VPN sessions supported by the VPN
Concentrator.
Note: This number should not exceed the maximum
number of simultaneous SSL VPN sessions allowed by
the license. In addition, a Stunnel IP Address Pool
should be configured with the same number of IP
addresses. See
Section Configuring a Stunnel IP Address
Pool on page 40
for details.
Select the certificate Stunnel will use from the drop
down menu. By default the system will use a self-signed
certificate. You can acquire a signed certificate by going
to the Certificate Store and generating a certificate
signing request (CSR) with a certificate type of HTTPS.
When you have uploaded the signed certificate in the
Certificate Store, you can select this signed certificate for
Stunnel to use.
The system supports Verisign or Go-Daddy signed
certificates. See
Section Downloading, Creating, and
Adding a Certificate on page 41
Configuring the VPN Concentrator
for more details.
39
Hide quick links:
Advertisement
Table of Contents
