ShoreTel 4500 Installation Manual page 36

Configuring the VPN Concentrator
To create a VLAN, enter the following settings and click Add. Repeat these steps to
create additional VLANs.
Parameter
VLAN ID
IP Address
Subnet Mask
To delete a VLAN or multiple VLANs simultaneously:
1. In the VLAN table, click the check box next to the VLAN(s) you want to delete. You can
select multiple VLANs to delete. To select all VLANs, click on the Select: All link. To
deselect VLANs, click on the Select: None link.
2.
Click the Delete button to delete the selected VLANs.
You must click the Submit button to complete the configuration of VLANs. This will restart
the network with your current VLAN configuration.
4.1.2.1 Assigning LAN Ports to VLANs (4500/4550 only)
On the VPN Concentrator model 4500/4550, you can assign LAN ports as members of a
VLAN using the VLAN Membership page. If a port is a member of a VLAN, it will accept
both tagged and untagged traffic of that VLAN. See
Ports (4500/4550 only)
accept only tagged traffic.
To access the VLAN Membership page, open the web configuration GUI for the 4500/4550
and choose System  Network VLAN Configuration. Click the VLAN Membership
link.
To assign a port as a member of a VLAN:
1. From the VLAN ID drop down menu, select the VLAN ID to which LAN Ethernet ports
will become members.
30
Enter a VLAN ID between 2 and 4093.
Enter the VLAN IP Address
Enter the VLAN Subnet Mask.
to configure PVIDs for untagged traffic or to configure a port to
Figure 4-5 VLAN Port Membership Page (4500/4550)
Description
Configuring VLAN Settings for LAN
Chapter 4