Table of Contents
Advertisement
Hardware Features
Component
G
H
Component
A
B
C
D
6
Description
Reset – Used to do a hard reset of the system.
Console – DB9 serial (RS232) port (male connector) for CLI-based
configuration. The serial port uses a baud rate of 9600, 8 data bits, 1 stop bit
and no parity.
Figure 1-4 Back Panel (5300LF)
Description
Power Inlet
• Accepts a 3-pin 3-pin Shroud Female connector of a power cord with 3-
pin Shroud Male connector on the other end to connect to an AC outlet
(For power specifications, see the
beginning of this manual).
Power Switch – Turns the system power on and off.
VGA Port – Not used.
2 x USB ports – Not used.
Specifications
section at the
Chapter 1
Hide quick links:
Advertisement
Table of Contents
