Table of Contents
Advertisement
Chapter 1
1.4.2
VPN Concentrator 5300LF and 5300LF2
The front panel and back panel components differ for the VPN Concentrator 5300LF and
5300LF2 models as defined here.
1.4.2.1
VPN Concentrator 5300LF
Component
A
B
C
D
E
F
VPN Concentrator Installation and Configuration Guide
Figure 1-3 Front Panel (5300LF)
Description
Erase
• If pressed twice in quick succession, the CLI password will be changed
to its default password.
• If pressed three times in quick succession, the 5300LF will revert to
factory default settings. All passwords will be reset and all prior
configurations will be erased.
Note: The default LAN address is set to 192.168.1.1
Caution: Setting the system configuration to factory default will erase all
configuration changes.
Power LED
Off – Power switch is off (or no power from the AC outlet).
Solid Green – Power is supplied to the unit.
Disk Activity LED
Off – No disk activity
Flashing Red – Data is being read or written to the disk.
Solid Red – System failure.
Port 3 (Management Port) – Out of band management port used for configu-
ration purposes. This port is DHCP-enabled from the factory.
Port 2 (WAN Port) – Connects to the WAN or upstream router. This port is
DHCP-enabled from the factory.
Port 1 (LAN Port) – Connects to the local network or LAN.
Caution: The device is pre-configured with an assigned LAN IP Address of
http://192.168.1.1. Changing the LAN IP Address may result in loss of your
VPN connection.
Hardware Features
5
Hide quick links:
Advertisement
Table of Contents
