Table of Contents
Advertisement
Accessing the Web Configuration GUI
3. Launch a web browser on the PC and enter the following URL:
If you are connecting to the 5300LF/LF2 after initial configuration, complete the following
steps:
1. Confirm with the system administrator if the Management Interface has been enabled.
If the Management Interface is enabled, you must connect to LAN port 3. Otherwise,
connect one end of an Ethernet cable to the LAN port of the 5300LF/5300LF2. Connect
the other end of the cable to your computer' s Ethernet port.
2. Assign a static IP address and subnet to your connecting computer that is on the same
broadcast domain as the LAN IP address provided by your system administrator.
3. Enter the IP Address for the LAN provided by your system administrator.
4. Press Enter. The following login window appears.
Figure 1-14 Web Interface GUI Login Window for the 5300LF/5300LF2
5. Enter the username as "root" and the password as "default" to log into the system. The
System configuration page appears.
14
http://192.168.1.1.
Note:
The default user name and password for the device is "root" and
"default". If this user name and password does not allow you to access
the device, it may have been changed. Obtain the user name and
password from your system administrator.
Chapter 1
Hide quick links:
Advertisement
Table of Contents
