Configuring Vpn Parameters On Ip Phones - ShoreTel 4500 Installation Manual

Chapter 4
Parameter
Enable Remote System
Logging
Remote Syslog Hosts
Syslog filter
Management Source Address
Set Hostname
Admin Inactivity Timeout
(seconds)
4.2

Configuring VPN Parameters on IP Phones

All ShoreTel IP Phones that support the VPN feature need to be configured to be aware of
the VPN Concentrator as well as how to authenticate with this device.
Two methods are provided:
1. Via MAC Address specific IP Phone configuration files.
VPN Concentrator Installation and Configuration Guide
Figure 4-22 Remote System Logging Section of Route Page
Check this option if you want to send syslog data to a
remote system running a system log server. This option
will help ShoreTel debug and solve the problems on the
local deployed VPN Concentrator.
Enter the IP address of the server to use for storing
system log files. The VPN Concentrator uses port 514 to
send syslog data.
Note: Do not send syslog data to a ShoreTel server as
that will impact performance of your ShoreTel system.
ShoreTel support will specify which filter to use.
Do not set this!
Enter the host name of the system to be displayed on the
System page.
This timer terminates login sessions that are inactive for
the number of second specified. This timer applies to
console, Telnet, and SSH logins. Changes to this value do
not affect sessions that are already open. A value of '0'
disables the inactivity timer. The largest allowed timeout
value is 86400 seconds. The default is '0'.
Configuring VPN Parameters on IP Phones
Description
51