Allen-Bradley 1734-IM4 User Manual page 26

10 Install POINT I/O Modules
Rockwell Automation Publication 1734-UM001E-EN-P - July 2013
1
9
8
7
6
Description
1 Module Locking Mechanism
3 Insertable I/O Module
5 One-piece Terminal Base with
Screw or Spring Clamp
7 Mechanical Keying (orange)
9 Module Wiring Diagram
1. Position the mounting base (wiring base assembly) vertically above the
installed units (adapter, power supply, or existing module).
2. Slide the mounting base down, allowing the interlocking side pieces to
engage the adjacent module, power supply, or adapter.
3. Press firmly to seat the mounting base on the DIN rail.
2
3
4
5
46116
Description
2 Slide-in Writable Label
4 Handle
6 Interlocking Side Pieces
8 DIN Rail Locking Screw (orange)
46117