Table of Contents
Advertisement
•
The input circuits are correctly sized for the loads and that you use sufficient overcurrent protection devices.
•
All protective covers are in place.
CAUTION:
Do not power up the switch if you did not install a fan module.
NOTE:
A US AC power cable is included for powering up an AC power supply. You must order all other power cables
separately.
NOTE:
ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the switch and its components.
Power up sequence
When the switch powers up, the fans immediately come on at high speed. The fan speed slows as the switch continues to boot up.
After switch installation
After you have securely installed and powered on the Z9332F-ON switch:
•
If you are using Dell EMC software, see switch documentation at www.dell.com/support.
•
If you are using third-party software, see ONIE documentation at www.onie.org.
Z9332F-ON Installation
13
Advertisement
Table of Contents
