Concealed Door Position Switch Instructions (3287) - Sargent SE LP10 7000 Series Installation Instructions Manual

8B Position Inside Escutcheon & Wires (ELR)
1. Position escutcheon against door by
hooking the top edge on the top of the ELR
assembly. Verify that no wires are being pinched.
2. Mount inside escutcheon assembly to
plate using (1) #8-32 x 5/8" Phillips flat
head undercut machine screw (Figure 8B).

Concealed Door Position Switch Instructions (3287)

8
Use SARGENT 3287 Concealed Door Position Switch with this product:
1. Concealed Door Position Switch Model 3287 is included with this product.
System integrator shall determine use and installation location.
2. If Sargent 3287 Concealed Door Position Switch installation is specified,
use SARGENT template A7448B to prepare door and frame at desired
location.
3. Connect the common wire of the switch to the common input
terminal of the EAC.
4. Connect the normally open wire of the switch to the normally
open input terminal of the EAC.
SE LP10 7000 Series Multi Point Lock
Machine
screw detail
16
A8239A• 800-810-WIRE (9473) • www.sargentlock.com
Fig. 8B (ELR)
Wiegand Access
Control System
12VDC: Optional 24VDC
Lock Available
(Reader is always 12VDC)
3287 Door
Position
Switch
McKinney
Electric
Hinge