Vga Display Connectors (Cn9, Cn10) - Aaeon Gene-5310 Manual

Display connectors (CN9, CN10)
The Gene-5310 can drive conventional CRT displays and is capable
of driving a wide range of flat panel displays. The board has two
connectors to support these displays, one for standard CRT VGA
monitors and one for flat panel displays.
VGA display connector (CN9)
A simple one-to-one adapter can be used to match CN9 to a
standard 15-pin D-SUB connector commonly used for VGA.
Pin Signal
1 Red video
2 Green video
3 Blue video
4 Not used
5 GND
6 Red returned(GND)
7 Green returned(GND)
8 Blue returned (GND)
Pin Signal
9 DENSITY SELECT
(no pin)
10 Sync return (GND)
11 Monitor ID (notused)
12 SDA
13 Horizontal Sync
14 Vertical Sync
15 SCL
Chapter 2 Installation 27