Aaeon Gene-5310 Manual page 75

Video Off Option
Select the power saving modes during which the monitor goes
blank.
Always on
Suspend--Off
Suspend, standby--Off
All Modes--Off
MODEM use IRQ
This determines the IRQ in which the MODEM can use.
The choices: 3, 4, 5, 7, 9, 10, 11, NA
State after power failure
This field lets your computer determine the state it returns to after a
power failure. If the function is set as OFF then the computer will
not boot after power fail. If the function is set as ON then the
computer will remain reboot after power fail.
-Wake Up Events-
VGA
When enabled, you can set the VGA to awaken the system
LPT & COM
When LPT & COM is set to ON, any activity from one of the
system peripheral devices or IRQs, wakes up the system.
66 GENE-5310 User Manual
Monitor remains on during power
saving modes.
Monitor blanked when system enters
suspension mode.
Off monitor blanked when system
enters either suspend or standby
mode.
Monitor blanked when system enters
any power saving mode.