Aaeon Gene-5310 Manual page 72

Onboard Legacy Audio
Onboard Legacy Audio can be set as enabled or disabled. However
disabling the Legacy Audio will render the functions listed below
useless.
Sound Blaster
The on board Sound Blaster can be configured as enable or disable.
SB I/O Base Address
Select a base I/O address for the Sound Blaster interface.
The choices: 220H, 240H, 260H, 280H
SB IRQ Select
Select a IRQ to use for the on board sound blaster.
The choices: IRQ 5, IRQ 7, IRQ 9, IRQ 10
SB DMA Select
Select a DMA address to use for the on board sound blaster.
The choices: DMA0, DMA1, DMA2, DMA3
MPU-401
Select enabled to configure the MPU-401 interface.
MPU-401 I/O Address
Select a base I/O address for the MPU-401 interface.
Chapter 3 Award BIOS Setup 63