Aaeon Gene-5310 Manual page 56

LCD&CRT
GENE-5310 can be used with various visual display peripherals. It
can also display the same image on both a CRT and LCD monitor
simultaneously. This function allows the end user to select the
type of visual display peripheral they are incorporating with the
GENE-5310 single board computer.
The choices: LCD, CRT, Both, and AUTO
Panel
GENE-5310 can be used with various display panels. Please select
the type of panel you are incorporating with our single board
computer. Consult your panel manual for detail information.
The choices: Reserved, (800x600 TFT), (640x480 18-bit TFT),
(800x600 18-bit DSTN), (640x480 18-bit DSTN), and (1024x768
TFT).
Halt On
During the power-on-self-test (POST), the computer stops if the
BIOS detects a hardware error. You can tell the BIOS to ignore
certain errors during POST and continue the boot-up process.
These are the selections:
No errors
: POST does not stop for any errors.
All errors If
: the BIOS detects any nonfatal error, POST
stops and prompts you to take corrective action.
All, But Keyboard
: POST does not stop for a keyboard
error, but stops for all other errors
All, But Diskette
: POST does not stop for diskette drive
errors, but stops for all other errors.
All, But Disk/Key
: POST does not stop for a keyboard or
disk error, but stops for all other errors.
Chapter 3 Award BIOS Setup 47