Table of Contents
Advertisement
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmable Input/Output) fields let you set a
PIO mode (0-1) for each of the four IDE devices that the onboard
IDE interface supports. Modes 0 through 4 provide successively
increased performance. In Auto mode, the system automatically
determines the best mode for each device.
The choices: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA33/66 implementation is possible only if your IDE hard
drive supports it and the operating environment includes a DMA
driver (Windows 95 OSR2 or a third-party IDE bus master driver). If
your hard drive and your IDE Cable both support Ultra DMA 33/66
select Auto to enable BIOS support.
The choices: Auto, disable
IDE HDD Block Mode
Select Enabled only if your hard drives support block mode.
60
GENE-5310 User Manual
Advertisement
Table of Contents
