Display Connectors (Cn10, Cn12) - Aaeon PCM-6890B User Manual

Display connectors (CN10, CN12)

The mainboard's PCI SVGA interface can drive conventional CRT
displays and is capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive
LCD, and active LCD displays. The board has two connectors to
support these displays, one for standard CRT VGA monitors and
one for flat panel displays.
VGA display connector (CN12)
CN12 is a 16-pin, dual-in-line header used for conventional CRT
displays. A simple one-to-one adapter can be used to match CN12
to a standard 15-pin D-SUB connector commonly used for VGA.
VGA display connector (CN12)
Pin
1
2
3
4
5
6
7
8
28 PCM-6890B User Manual
Signal
RED
N/C
GREEN
SIGNAL GND 12
BLUE
N/C
N/C
N/C
Pin Signal
9 SIGNAL GND
10 H-SYNC
11 CHASSIS GND
V-SYNC
13 CHASSIS GND
14 N/C
15 CHASSIS GND
16 N/C