Vga Display Connector(Cn6) - Aaeon SBC-558P Manual

VGA Display connector (CN6)
The SBC-558P PCI SVGA interface can drive conventional CRT
displays and is capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive
LCD, and active LCD displays. The board has two connectors to
support these displays, one for standard CRT VGA monitors and
one for flat panel displays.
VGA display connector (CN6)
A simple one-to-one adapter can be used to match CN6 to a
standard 15-pin D-SUB connector commonly used for VGA.
Pin
1
2
3
4
5
6
7
8
Signal
Red video
Green video
Blue video
Not used
GND
Red returned(GND)
Green returned(GND)
Blue returned (GND)
Pin Signal
9 Key (on pin)
10 Sync return (GND)
11 Monitor ID (notused)
12 Monitor ID
13 Horizontal Sync
14 Vertical Sync
15 Not used
SBC-558P Installation Guide 19