1
ABOUT THIS DOCUMENT
1
About this document
1.1
Scope
1.2
Target groups and structure of these operating instructions
6
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core
These operating instructions contain information required during the life cycle of the
safety light curtain.
These operating instructions are available to all those who work with the safety light
curtain.
Please read these operating instructions carefully and make sure that you understand
the content fully before working with the safety light curtain.
These operating instructions only apply to the deTec4 Core safety light curtain with one
of the following type label entries in the Operating Instructions field:
•
8014251
•
8014251/WQ70
•
8014251/WS65
•
8014251/Y310
This document is included with the following SICK part numbers (this document in all
available language versions):
8014251/YST2
These operating instructions are intended for the following target groups: Project devel‐
opers (planners, developers, designers), installers, electricians, safety experts (e.g., CE
authorized representatives, compliance officers, persons who test and approve the
application), operators, and maintenance personnel.
The structure of these operating instructions is based on the life cycle phases of the
safety light curtain: Project planning, mounting, electrical installation, commissioning,
operation, and maintenance.
In many applications, the target groups are assigned as follows to the manufacturer
and the organization operating the machine in which the safety light curtain is inte‐
grated:
Area of responsibility
Target group
Manufacturer
Project developers
(planners, developers,
designers)
Installers
Electricians
Safety specialists
Special chapters of these operating instruc‐
tions
1)
Project
planning,
page 17
Technical
data,
page 52
Accessories,
page 59
Mounting,
page 27
Electrical
installation,
page 36
Project
planning,
page 17
Commissioning,
page 38
Technical
data,
page 52
Checklist for initial commissioning and com‐
missioning,
page 67
8014253/YST2/2016-04-11 | SICK
Subject to change without notice
Need help?
Do you have a question about the deTec4 Core and is the answer not in the manual?
Questions and answers