Table of Contents
Advertisement
5. To toggle the display between DIGITS view and B-SCAN view, press ESC.
6. If you are unable to take a measurement due to the measurement location being physically
inaccessible, press CLR.
The cell location in the data file is marked OBST (Obstruct).
7. The display of the log data file on the measurement screen can be switched on and off:
•
To switch off, press MEAS.
•
To switch on, press ENTER.
24.6 VIEWING AND DELETING READINGS
With a data file open:
1. Use the arrows to scroll through the cells in the data file.
As the cursor is moved to a different cell, the display is updated with the display view saved
with the reading (if SAVE GRAPHICS was set to YES). Readings stored in memory are
indicated by MEM in the top left corner of the measurement screen (in place of the bars of the
stability indicator).
2. To delete a reading, scroll to the cell location, press CLR and then OK (or ESC to cancel).
The reading is deleted and if you wish you can now take another measurement and save the
reading in this cell location.
24.7 EDITING A DATA LOGGER FILE
You can edit the following fields of data files:
•
Grid files: NAME, NOTE, and INCRement DIRection
•
Sequential files: NAME, NOTE, DIRECTION and LOG SIZE
To edit a file:
1. Open the data file.
2. EDIT and press ENTER.
The EDIT GRID LOG (or EDIT SEQ LOG) screen is displayed and lists all the fields which can
be edited.
3. Scroll to the field you want to edit, press ENTER and then adjust the contents of the field using
the techniques previously described to create a data file - see page 47.
4. When finished, scroll to SAVE CHANGES, press ENTER and then OK (or ESC to cancel).
24.8 DELETING A DATA LOGGER FILE
1. Select MENU/DATA/DELETE ONE FILE.
2. Press ENTER.
The OPEN LOG screen is displayed and lists all the data files stored in your gauge memory.
3. Scroll through the list until the data file you want to delete is highlighted.
4. Press OK (or ESC to cancel).
The file is deleted.
24.9 DELETING ALL DATA LOGGER FILES
Note: This will delete all the data logger files in gauge memory - use with caution.
1. Select MENU/DATA/DELETE ALL DATA
2. Press ENTER and then OK to confirm (or ESC to cancel).
The data logger memory is erased - all files are deleted.
49
Advertisement
Table of Contents
