Table of Contents
Advertisement
principal advantage of ultrasonic measurement over traditional methods is that ultrasonic
measurements can be performed with access to only one side of the material being measured.
Your gauge has four types of measurement screen:
•
A-Scan Waveform, RF
•
A-Scan Waveform, RECT
•
B-Scan
•
Digits
A-SCAN
RF
To see the measurement screen, press MEAS.
To select which measurement screen to use, press MENU/DISP/VIEW and then select RF, RECT,
B-SCAN or DIGITS.
6.1 ITEMS COMMON TO ALL MEASUREMENT SCREENS
A number of items are common to all the measurement screens:
A
Battery Icon
B
Repeatability/Stability
Indicator
C
Material Thickness
Value/
Material Velocity Value
A-SCAN
RECT
A
B
E
F
G
H
Remaining battery life.
This indicator is used in conjunction with the digital thickness
values displayed. When all the vertical bars are fully illuminated
and the last digit on the digital thickness value is stable, your
gauge is reliably measuring the value.
The thickness or sound velocity of the material under the
transducer (type depends upon measurement view)
B-SCAN
C
D
DIGITS
10
Advertisement
Table of Contents
