Table of Contents
Advertisement
This product meets the Electromagnetic Compatibility Directive.
The product is Class A, Group 1 ISM equipment according to CISPR 11.
Group 1 ISM product: A product in which there is intentionally generated and/or used
conductively coupled radio-frequency energy which is necessary for the internal
functioning of the equipment itself.
Class A product are suitable for use in all establishments other than domestic and those directly connected
to a low voltage power supply network which supplies buildings used for domestic purposes.
Note: In the close presence of some radio transmitters, erroneous readings may be given. If this occurs tests
should be repeated at another location.
These operating instructions are available for download on our website www.elcometerndt.com.
The following trademark is a registered trademark of Elcometer Limited, Edge Lane, Manchester, M43 6BU.
United Kingdom:
Material Safety Data Sheets for the ultrasonic couplant supplied with the FD700DL+ & FD700+ and
available as an accessory, are available to download via our website:
Elcometer NDT Ultrasonic Couplant Material Safety Data Sheet :
www.elcometerndt.com/images/MSDS/elcometer_ultrasonic_couplant.pdf
Elcometer NDT Ultrasonic Couplant Material Safety Data Sheet :
www.elcometerndt.com/images/MSDS/elcometer_ultrasonic_couplant_hi_temp.pdf
All other trademarks acknowledged. © Elcometer Limited 2012. All rights reserved. No part of this document
may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or translated into
any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise)
without the prior written permission of Elcometer Limited.
1
TMA-0561 Issue 01
Text with cover: 23833
Advertisement
Table of Contents
