Product Feature Overview; Server Board Feature Set - Intel S7200AP System Integration And Service Manual

1.1 Product Feature Overview

1.1.1 Server Board Feature Set

Intel® Server Board S7200AP Product Family contains two server board options. Intel® Server Board
S7200AP supports Intel® Xeon™ Phi™ x200 CPUs (up to 230w TDP) in Intel® Server Chassis H2312XXLR2
and H2216XXLR2.
Intel® Server Board S7200APR supports both Intel® Xeon™ Phi™ x200 and Intel® Xeon™ Phi™ 72x5 Product
Family CPUs (up to 320w TDP) in Intel® Server Chassis H2204XXLRE.
This document describes the servicing of both compute modules. Although, these boards are
independent and stand-alone products, there are many features and service steps that are common to
each board. These common steps will be identified in its respective section.
The following tables list the common feature set, however, a board will be identified by its product code
when a described feature or function is unique to it.
Table 1. Intel® Server Board S7200AP Product Family Feature Set
Feature
Processor Support
Memory Support
Chipset
External I/O Connections
Internal I/O
connectors/headers
PCIe Support
Power Connections
System Fan Support
Video
Intel® Xeon™ Phi™ x200 Product Family
Single processor socket P (3647 pins)

Thermal Design Power (TDP) up to 230W

36 lanes of Integrated PCI Express® 3.0 low-latency I/O

Six DIMM slots in total across six memory channels

Registered DDR4 (RDIMM), Load Reduced DDR4 (LRDIMM)

Memory DDR4 data transfer rates of 2400/2666 MT/s

1 DIMM per channel

Max memory 384GB

Intel C610 "Wellsburg" Platform Controller Hub (PCH)
Two USB 3.0 connectors

Two RJ-45 10/100/1000 Mbit Network Interface Controller (NIC) ports

One USB 2.0 Header

One TPM Header

One Intel® Omni-Path Fabric Signal Connector

One mSATA Connector

One Bridge Board Connector

One 2x7 pin header for system fan module

One Aux Front Panel Connector

Three 8-pin fan headers for non-Intel chassis support

One 4 pin CPU fan or liquid cooling pump support header

One PSU Control Header

One RMII header for Intel® RMM4 Lite

One internal RGB Video Header

One Serial Port A Header

PCIe* 3.0 (2.5, 5, 8 GT/s)
One 2x4 pin main power connector
•
One 2x2 pin aux. power connector
•
One 4 pin power connector for disk drive power
•
Three 40x56mm double rotor fans

One 4 pin CPU fan or liquid cooling pump support header

Integrated 2D video graphics controller

128MB DDR3 memory

Description