Figure 43. Install Cpu And Carrier To Cold Lacc Cold Plate - Intel S7200AP System Integration And Service Manual

1. Power off the compute module and disconnect the power cable(s).
2. Remove the air duct.
3. The LACC cold plate assembly is modeled after the passive air heatsink assembly. The sequence and
method of installing the CPU and Carrier is exactly the same as the passive air heatsink. This step is
only required if the CPU requires replacement or installation. For simplification, refer to the CPU and
Carrier installation instructions in
4. Carefully place and position the LACC assembly back into the system by using two hands. Ensure that
it is properly aligned and that the cold plate aligns correctly with the CPU socket assembly and guide
pins.
See section 2.3.1.
Section 2.4

Figure 43. Install CPU and Carrier to Cold LACC Cold Plate

for detail.