Light And Smv Bracket Installation (Prior To August, 2013) - Landoll VT Plus 7431 Operator's Manual

Light and SMV Bracket
Installation (Prior to August,
2013)
1. Attach lights and mounting brackets to the center
frames using u-bolts, 1/2-13 x 8-1/2 hex head cap
screws, flange head serrated nuts, and hex lock nuts
(See Figure 3-21.) Refer to pages 2-8 thru 2-17 for
light bracket placements.
ASSEMBLY INSTRUCTIONS
2. Mount enhanced lighting module on right hand tail
light bracket using #8-32 x 1/2 pan head slotted
screw and nuts. Connect rear harness to module and
connect the right/left side lights accordingly. Route
main wire harness through hose holder on hitch,
down the left side of the center frame and across the
back to the enhanced lighting module plug.
3. Connect light harness to lights.
4. Attach SMV emblem and mounting bracket to rear
center frame bar using u-bolt, 1/4-20 x 3/4 hex head
cap screws, and hex lock nuts. The SMV sign should
be centered on the back bar of the frame.
3-27