Introduction And Safety Information; Introduction - Landoll VT Plus 7431 Operator's Manual

Introduction

The Landoll Model 7431 VT Plus is a quality product designed to give years of trouble free performance. By following
each section of this manual, your system will perform as designed for you and your operation.
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
CHAPTER 5
PARTS MANUAL
WARRANTY
COMMENTS

Introduction and Safety Information

Gives basic instructions on the use of this manual and understanding the safety
statements.
Gives product specifications for the equipment. These specifications supply lengths and
measures for your equipment. A Standard Bolt Torque Table is provided to give
guidelines for bolt torques to be used when servicing this product.
Contains assembly instructions for your 7431 VT Plus. When these procedures are
correctly followed, your equipment should provide you years of trouble-free operation and
service.
Instructs how to operate your equipment before using it, and describes adjustments
needed. Gives practical advice for the care and maintenance of your Landoll equipment.
Drawings in this section locate adjustment points on the equipment.
Is a troubleshooting guide to aid in diagnosing and solving problems with the VT Plus
Is a separate manual showing the various assemblies, subassemblies, and systems.
Refer to that manual when ordering Landoll replacement parts. Order parts from your
Landoll dealer.
The Warranty Registration form is included with the product documents. Fill it out and
mail it within 15 days of purchase.
NOTE: IMPROPER ASSEMBLY, MODIFICATION, OR MAINTENANCE OF YOUR
LANDOLL MACHINE CAN VOID YOUR WARRANTY.
Address comments or questions regarding this publication to:
IF YOU HAVE ANY QUESTIONS CONTACT:
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
PHONE # (785) 562-5381 or (800) 428-5655
OR
FAX # (888) 527-3909
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
ATTENTION: PUBLICATIONS - DEPT. 55
Chapter 1
1-1