Operator Hazard Training - EFD Ultra 325TT User Manual

®
A NORDSON COMPANY
11. Block, chain or release stored energy sources.
12. Always unplug the machine and disconnect the main airline to the system before
opening any panels for service. Once the machine has been disconnected from
power and air, the electric cord and airline must remain in sight of the individual
performing maintenance. This is to prevent accidental start-up of any energy
sources.
ii.

OPERATOR HAZARD TRAINING

Operators and technicians should know the closest location of the following safety related
items in your facility:
• Emergency Exits
• Emergency Telephone
• Eye-Wash Station
• Fire Extinguisher
• First Aid Station
• MSDS Station
In the event of an emergency or malfunction, press the Emergency Machine Off (EMO)
button. The EMO is the large red button located on the front panel of the dispensing
system. Activating the EMO vents all pressure in the pneumatic system, de-energizes the
servo power supply capacitors, and cuts power to all components. As a minimum, activate
the EMO in the following situations:
1. If anyone is in immediate danger of being injured by moving parts, hazardous
materials, or electrical shock.
2. If valuable dispensing system components or the work-pieces are in danger of
being damaged. This can include:
- Physical damage to the dispensing valve or work-piece by unexpected
- Electrical damage to the dispensing system.
If an injury occurs during operation or servicing of the System, it is recommended that the
following steps be taken:
1. If the dispensing system is operating when the injury occurs, press the nearest
EMO button to stop all system operations.
2. Immediately report injury to supervisor in accordance with facility procedures.
3. If it is an injury due to exposure to a hazardous material, refer to the treat
recommendations on the material manufacturer's Material Safety Data Sheet
(MSDS).
4. Seek medical help if necessary.
Dispensing Head movement.
Ultra TT User's Guide
Version 1.2
8