Inserting An Output Instruction - EFD Ultra 325TT User Manual

®
A NORDSON COMPANY
5.8

INSERTING AN OUTPUT INSTRUCTION

The Output instruction is available in the Select Instruction drop-down menu. It allows the User
to insert an instruction into the dispense program that will assert or negate up to three specified
output bits.
The map below indicates the pin assignment for the DB25 connector for general-purpose outputs.
It also indicates the specific bit assigned to each of the output that is used in the PDA software to
read output.
Pin#
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
For assistance in creating the logic scripts and to load inputs, please contact your local
EFD representative.
8
The assigned address for the particular I/O.
Description Name
spare
spare
D_COM_Sink
D4_Sink GP_OUTPUT_15
D3_Sink GP_OUTPUT_14
D2_Sink GP_OUTPUT_13
D1_Sink GP_OUTPUT_12
C_COM_Sink
C4_Sink GP_OUTPUT_11
C3_Sink GP_OUTPUT_10
C2_Sink GP_OUTPUT_9
C1_Sink GP_OUTPUT_8
Spare
Spare
Spare
B4_Source GP_OUTPUT_7
B3_Source GP_OUTPUT_6
B2_Source GP_OUTPUT_5
B1_Source GP_OUTPUT_4
B_COM_Source
A4_Source GP_OUTPUT_3
B4_Source GP_OUTPUT_2
A2_Source GP_OUTPUT_1
A1_Source GP_OUTPUT_0
A_COM_Source
General Purpose Output Connector Map
Ultra TT User's Guide
Version 1.2
Bit 8
Bit 25
Bit 24
Bit 23
Bit 22
Bit 21
Bit 20
Bit 19
Bit 18
Bit 17
Bit 16
Bit 15
Bit 14
Bit 13
Bit 12
Bit 11
Bit 10
47