Changing Program Id; Changing Program Origin - EFD Ultra 325TT User Manual

®
A NORDSON COMPANY
6.7 CHANGING PROGRAM ID NUMBER
6.8

CHANGING PROGRAM ORIGIN

You can change the program origin anytime:
• Tap the top left-hand corner of the Program screen.
• From the "Edit" drop-down menu, select "Program Origin".
• Tap "Go To" to check the position of the current program origin
• Jog to the new program origin position
• Tap "Teach" to confirm
Note: Before confirming/changing program origin, the toggle valve
will toggle up if it is in the down position.
WARNING!
zero position will erase all Z coordinates in the program and they cannot be
recovered. You will then have to manually re-enter each line of the program.
From time to time, you may need to reassign a program ID number.
To do this, select Program ID in Edit drop-down menu. This will open
the Change Program ID window.
The Change Program ID window displays
the current program ID number and the
closest open available ID number. You
can enter the desired ID number or use
the default number provided.
Do not tap "Teach" when Z is at zero position. Tapping "Teach" at
Ultra TT User's Guide
Version 1.2
52