Editing Functions; Deleting Instruction Line(S) From A Program; Copying Instruction Line(S) To A New Program - EFD Ultra 325TT User Manual

®
A NORDSON COMPANY
6.9

EDITING FUNCTIONS

There are several editing functions available within the Program mode.
6.9.1 DELETING INSTRUCTION LINE(S) WITHIN A PROGRAM
1. Tap the top left-hand corner of the Program screen.
2. From the "Edit" drop-down menu, select "Mark".
3. Select the program lines you want to delete. A "->" sign will
appear before the instruction to indicate which line has been
selected.
4. From the "Edit" drop-down menu, select "Cut". The selected
instruction lines will be deleted from the program.
6.9.2 COPYING INSTRUCTION LINE(S) INTO ANOTHER PROGRAM
• Tap the top left-hand corner of the Program screen.
• From the "Edit" drop-down menu, select "Mark" for line-by-line
selections or "Select All" to pick all the instruction lines. Tap the
selected line again to deselect it.
• Select the program lines you want to copy. A "->" sign will appear
before the instruction to indicate which line has been selected.
• From the "Edit" drop-down menu, select "Copy".
• Go to the program you want to paste these instruction lines onto.
• From the "Edit" drop-down menu, select "Paste". The selected
instruction lines will be copied into the new program.
Ultra TT User's Guide
Version 1.2
53