EFD Ultra 325TT User Manual page 46

®
A NORDSON COMPANY
5. Tap "Jog" and jog the dispense tip to the desired insertion point.
Tap "OK" and then "Teach". This inserts the program at that
point.
Note: The origin of the program called out is inserted at the location
(either XY or XYZ) you just taught.
2. Select Do Program and then tap "OK" to open the
Do Program screen.
3. Select the name of program to insert from the Program
drop-down menu.
4. Default for the "Do Program"
instruction is at a specific XY
location. Hence, the check box
"Use XY" is selected by default. If
the program is to be placed at a Z
location as well as an XY location,
check the "Use XYZ" box.
6. From the Edit window, select Dot or Line Parameters and enter
desired values. The higher-level program ignores the dot line
parameters of the lower-level programs. If these values are not
adjusted in the higher-level program, all dot and line parameters
will run at the default settings.
Ultra TT User's Guide
Version 1.2
46