Power Up - EFD Ultra 325TT User Manual

®
A NORDSON COMPANY
7.1

POWER UP

If a power-up failure occurs, a soft key will appear to
prompt for corrective actions. Press the dome switch
under "Next" and follow the instructions. This will
usually be followed with an error message stating what
failure occurred.
Corrective action should be taken according to
displayed text.
Upon power up, the LCD will display a splash screen that
indicates machines version of firmware (circled). The
main board power-up test result will also be displayed
here (either "OK" or "FAIL").
Note: As of the published date of this manual, the most
current Firmware is Version 1.1
Error messages display the problem and corrective
actions are to be taken. The LCD will prompt the
Operator to perform a specific corrective action or refer
the Operator to the technical manual for further
explanations.
Ultra TT User's Guide
Version 1.2
54