PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
PIO_PISO.EXE Utility
The PIO_PISO.EXE utility is valid for all PIO/PISO cards. This program shows all PCI hardware ID
regarding the PIO and PISO series DAQ cards. It is useful to test if the card Plug & Play successfully
when the computer bootup. If the PIO or PISO series card does not shown in the screen correctly,
please try to use another PCI slot and try again.
The user can execute the PIO_PISO.EXE to get the following information:
List all PIO/PISO cards installed in this PC
List all resources allocated to every PIO/PISO cards
List the wSlotBus and wSlotDevice for specified PIO/PISO card identification.
For Windows OS
The PIO_PISO.EXE utility is located on the CD as below and is useful for all PISO/PIO series boards.
(CD:\NAPDOS\PCI\Utility\Win32\PIO_PISO\)
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/utility/win32/pio_piso/
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 43