Table of Contents
Advertisement
PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
Step 4: Select the folder where the drivers are to install. The default path is
C:\ICPDAS\UniDAQ. But if you wish to install the drivers to a different location , click the
"Browse..." button and select the relevant folder and then click the Next> button.
Step 5: When the Select Components screen is displayed, check PCI-1002 series board
on the list, then click the Next> button.
Step 6: When the Select Additional Tasks screen is displayed, click the Next> button.
Installation
Step 7: When the Download Information screen is displayed, click the Next> button.
Procedure
Step 8: Select the item "Yes, restart the computer now", press the Finish button.
System will reboot.
For more detailed information about how to install the UniDAQ driver, refer to "Section 2.2
Install UniDAQ Driver DLL" of the UniDAQ Software Manual, which can be found in the
\NAPDOS\PCI\UniDAQ\Manual\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/manual/
folder on the companion CD, or can be downloaded from:
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 28
Advertisement
Table of Contents
