Package - ICP DAS USA PCI-1002L User Manual

PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
4.
Software Installation
This chapter provides a detailed description of the process for installing the PCI-1002 series driver
and how to verify whether the PCI-1002 series was properly installed. PCI-1002 series card can be
used on DOS, Linux and 32-/64-bit XP/2003/2008/7/8/10 based systems, and the drivers are fully
Plug and Play (PnP) compliant for easy installation.
4.1 Obtaining/Installing the Driver Installer

Package

The driver installation package for PCI-1002 series board can be found on the companion CD-ROM,
or can be obtained from the ICP DAS FTP web site. Install the appropriate driver for your operating
system. The location and website addresses for the installation package are indicated below.
UniDAQ Driver/SDK (It is recommended to install this driver for new user.)

Windows 2000, 32/64-bit Windows XP, 32/64-bit Windows 2003,
Operating
32/64-bit Windows 2008, 32/64-bit Windows Vista, 32/64-bit Windows 7, 32/64-bit
System
Windows 8, 32/64-bit Windows 10
UniDAQ Driver/SDK (unidaq_win_setup_xxxx.exe)
Driver Name
CD-ROM
CD:\\ NAPDOS\PCI\UniDAQ\DLL\Driver\
Web site
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
Please follow the following steps to setup software:
Step 1: Double click the UniDAQ_Win_Steupxxx.exe to setup it.
Installation
Step 2: When the Setup Wizard screen is displayed, click the Next> button.
Procedure
Step 3: When the Information screen is displayed, click the Next> button.
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 27