Table of Contents
Advertisement
PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
Step 5: Check the results of the Analog Input function test.
1. Click the "Analog Input" tab.
2. Confirm the configuration settings for the card type, input range and sample rate items.
3. Click "Start" button to start test.
10
4. Check Analog Input on Channel 0 textbox. The other channels value for floating number.
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 40
Note:
When reading analog-input, the
non-wired channel gets floating
value. User can wire these
unused channels to GND for
getting stable state if need.
Advertisement
Table of Contents
