PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
5.
Board Testing
This chapter provides detailed information about the "Self-Test" process, which is used to confirm
that the PCI-1002 series board is operating correctly. Before beginning the "Self-Test" process,
ensure that both the hardware and driver installation procedures are fully completed. For detailed
information about the hardware and driver installation, refer to
Chapter 3 "Hardware Installation"
and
Chapter 4 "Software Installation".
5.1 Self-Test Wiring
5.1.1 Digital Input/Output Test Wiring
Before beginning the "Self-Test" procedure, ensure that the following items are available:
A CA-2002 Cable
(Optional, Website: http://www.icpdas.com/products/Accessories/cable/cable_selection.htm)
Step 1: Use the CA-2002 cable to connect the CON1 with CON2 on your board.
CA-2002
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 36