Launch The Test Program - ICP DAS USA PCI-1002L User Manual

PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board

5.2 Launch the Test Program

The following example use UniDAQ driver to perform self-test. If you install the PCI-1002 series
classic driver, please refer to Quick Start Guide of the PCI-1002
(http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1002/manual/quickstart/classic/) to
execute the self-test.
Step 1: Double-click the UniDAQ Utility software. The UniDAQ Utility will be placed in the default
path "C:\ICPDAS\UniDAQ\Driver" after completing installation.
Step 2: Confirm that your board has been successfully
installed in the Host system. Note that the device
number starts from 0.
Step 3: Click the "TEST" button to start the test.
Note:
The PEX-1002L/H and PCI-1002LU/HU software is fully
compatible with the PCI-1002L/H series software.
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 38