Software Installation - ICP DAS USA PCI-1002L User Manual

PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
Step 10: Replace the covers on the
computer.
Step 11: Re-attach any cables, insert the power cord and then switch on the power to the
computer.
Step 9: Confirm that the board is correctly inserted in the
motherboard, and then secure your board in place using
the retaining screw that was removed in Step 6.
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 26
Once the computer reboots, follow any
message prompts that may be
displayed to complete the Plug and Play
installation procedure. Refer to

4 "Software Installation"

information.
Chapter
for more