Table of Contents
Advertisement
Quick Links
for PCI-1800 LU/HU
for PEX-P8R8i/P16R16i
PCI-1802 LU/HU
English/ Version 1.1/ April 2010
English/ May 2010/ Version 1.0
What's in the shipping package?
One PCI-1800/1802
series card
(LU/HU)
One companion PCI CD (V4.7 or later)
One Quick Start Guide (This document)
One CA-4002 D-Sub connector
Software Utility CD
CA-4002 D-Sub Connector
PCI-1800/1802
(LU/HU)
Series Card
Quick Start Guide
1
PCI-1800/1802 LU/HU Quick Start Guide
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICP DAS USA PCI-1800 LU
Summary of Contents for ICP DAS USA PCI-1800 LU
- Page 1 PCI-1800 LU/HU for PEX-P8R8i/P16R16i PCI-1802 LU/HU English/ Version 1.1/ April 2010 English/ May 2010/ Version 1.0 What’s in the shipping package? One PCI-1800/1802 series card (LU/HU) One companion PCI CD (V4.7 or later) One Quick Start Guide (This document)
- Page 2 Installing Windows Driver Follow these steps: 1. Setup the Windows driver. The driver is located at: CD:\NAPDOS\PCI\PCI-180x\DLL_OCX\ http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-180x/dll_ocx/ The Windows driver only supports Windows 98/NT/2000/ and 32-bit Windows XP/2003/Vista/7 Versions. “Next>” 2. Click the button to start the installation. “Next>” 3.
- Page 3 SW1 Card ID Setting Card ID (Default Setting) (*) Default setting JP1: Analog Input Type Selection. (Please make sure JP1 jumper is kept in default setting before self-test.) Installing Hardware on PC Follow these steps: 1. Shut down and power off your computer. 2.
-
Page 4: Pin Assignments
Pin Assignments CON1 Digital Output connector (20-pin box header) CON2 Digital Input connector (20-pin box header) CON3 Analog Input Connector (Female DB37) PCI-1802LU/HU PCI-1800LU/HU 32-ch Single-Ended/ 16-ch Single-Ended/ 16-ch Differential 8-ch Differential PCI-1800/1802 LU/HU Quick Start Guide... -
Page 5: Analog Input Test Wiring
Self Test DIO Test Wiring: 1. Use CA-2002 to connect the CON1 with CON2. (optional) Analog Input Test Wiring: 2. Prepare for device: DN-37 (optional) wiring terminal board. Provide a stable signal source. (For example, dry battery) 3. Connect a DN-37 to the COM3. PCI-1800/1802 LU/HU Quick Start Guide... - Page 6 For PCI-1802 LU/HU: Connect the AI 0 (Pin1) to signal positive (+) Connect the A.GND (Pin17) to signal negative (-) For PCI-1800 LU/HU: Connect the AI 0 (Pin1) to signal positive (+) Connect the A.GND (Pin14) to signal negative (-)
- Page 7 Execute the PCI-1800/1802 sample program: (LU/HU) 5. The sample program is contained in: CD:\NAPDOS\PCI\PCI-180x\DLL_OCX\Demo\ http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-180x/dll_ocx/demo/ Delphi 6. The following sample program is written in File: DLL_Delphi3_xxxxxx.exe Path: ..\ DLL_Delphi3\01\ Double click the “Demo1.exe” 7. Verify total numbers of the PCI-1800/1802 (LU/HU) card and perform AI, DIO functions test.
-
Page 8: Additional Information
8. Get AI and DIO function test result. Check the “Digital Out” value (write) and “Digital In” value (read) should be identical. Check analog input on CH0 textbox. Check continual analog input on CH0. Additional Information PCI-1800/1802 LU/HU Series Card product page: http://www.icpdas.com/products/DAQ/pc_based/pci_1800.htm CA-3710, CA-2002 and DN-37 page (optional): http://www.icpdas.com/products/Accessories/cable/cable_selection.htm...
Need help?
Do you have a question about the PCI-1800 LU and is the answer not in the manual?
Questions and answers