Dio Test; Ad Test - ICP DAS USA PCI-1002L User Manual

PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board

8.3.3 DIO Test

Step 1: Power-off PC.
Step 2: Install one PCI-1002 card with a 20-pin flat cable between CON1 and CON2.
Step 3: Power-on PC, Then run DEMO2.EXE of DOS.
Step 4: The DO and DI will show either TEST OK or TEST ERROR.

8.3.4 AD Test

Step 1: Power-off PC.
Step 2: Install one PCI-1002 card.
Step 3: Power-on PC, run DEMO6.EXE of DOS
Step 4: Apply +10V to channel 0.
Step 5: Apply +0V to channel 1.
Step 6: Apply -10V to channel 2.
Step 7: Run DEMO6.EXE.
Step 8: Check channel 0 = fff or ffe?
Step 9: Check channel 1 = 800 or 801?
Step 10: Check channel 2 = 000 or 001?
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 66