Features - ST STM32L4 User Manual

Features

1 Features
• Ultra-low-power STM32L4 Series MCUs based on Arm
of Flash memory and 128 Kbytes of SRAM, in LQFP100 package
• 64-Mbit Quad-SPI (Macronix) Flash memory
• Bluetooth
• Sub-GHz (868 or 915 MHz) low-power-programmable RF module
(SPSGRF-868 or SPSGRF-915)
®
• Wi-Fi
• Dynamic NFC tag based on M24SR with its printed NFC antenna
• 2 digital omnidirectional microphones (MP34DT01)
• Capacitive digital sensor for relative humidity and temperature (HTS221)
• High-performance 3-axis magnetometer (LIS3MDL)
• 3D accelerometer and 3D gyroscope (LSM6DSL)
• 260-1260 hPa absolute digital output barometer (LPS22HB)
• Time-of-Flight and gesture-detection sensor (VL53L0X)
• 2 push-buttons (user and reset)
• USB OTG FS with Micro-AB connector
• Board expansion connectors:
– Arduino™ Uno V3
– PMOD
• Flexible power-supply options: ST-LINK USB V
• On-board ST-LINK/V2-1 debugger/programmer with USB
re-enumeration capability: mass storage, virtual COM port and debug port
• Comprehensive free software including a variety of examples, as part of the STM32Cube
package, as well as a cloud connector software expansion, enabling direct access to cloud
servers
• Support of wide choice of Integrated Development Environments (IDEs) including IAR
®
Keil , GCC-based IDEs, Arm
®
• Arm
6/57
®
V4.1 module (SPBTLE-RF)
module Inventek ISM43362-M3G-L44 (802.11 b/g/n compliant)
™
mbed Enabled (see http://mbed.org)
BUS
® ™
mbed Enabled
UM2153 Rev 4
® ®
Cortex -M4 core with 1 Mbyte
or external sources
UM2153
™
,