Product Marking; System Requirements; Development Toolchains; Demonstration Software - ST STM32L4 User Manual

UM2153
2

Product marking

Evaluation tools marked as "ES" or "E" are not yet qualified and therefore they are not ready
to be used as reference design or in production. Any consequences deriving from such
usage will not be at ST charge. In no event, ST will be liable for any customer usage of these
engineering sample tools as reference design or in production.
"E" or "ES" marking examples of location:
•
On the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the section "Package characteristics" of the STM32 datasheet at www.st.com).
•
Next to the evaluation tool ordering part number, that is stuck or silk-screen printed on
the board.
3

System requirements

•
Windows
•
USB Type-A to Micro-B cable
4

Development toolchains

•
Keil
•
IAR
•
GCC-based IDEs including free SW4STM32 from AC6
•
Arm
5

Demonstration software

The demonstration software, included in the STM32Cube package, is preloaded in the
STM32 Flash memory for easy demonstration of the device peripherals in standalone mode.
The latest versions of the demonstration source code and associated documentation can be
downloaded from the www.st.com/stm32app-discovery webpage.
a. On Windows
®
OS (XP, 7, 8 and 10), Linux
® (a)
MDK-Arm
™ (a)
EWARM
® ™
mbed Enabled online
®
only.
®
or MacOS
UM2153 Rev 4
Product marking
™
7/57
56